Grupo Industronic
UPS UPS-IND 1200, No Break
movil07_12ago15
Two-phase UPS with surge protection for use in workshops, restaurants, data centers and computer rooms
UPS UPS-IND 1200, No Break
1200_slide
Two-phase UPS with surge protection for use in workshops, restaurants, data centers and computer rooms

VIDEO

Features

CARACT_UPS_1200

Features

  • Online double conversion, enabling continuous operation of electrical equipment
  • Durability ideal for heavy loads
  • Inverter with IGBT technology
  • Cold-start capability, battery start-up
  • Software for UPS-IND 1200 monitoring
  • SNMP Card included

Technical Specifications

  • Voltage Range
    220V +/- 25% (165-275VAC)
  • Output Voltage Options
    110 or 220V +/- 1%
  • Power Factor
    0.7
  • Efficiency
    99% average
  • Isolation Transformer
    220V input and 120/208/220/240V +/- 1% output
  • Smart Communications Port
    RS-232/RS-485
  • Output Distortion
    Less than 3% THD (linear load)
  • Overload Protection
    Circuit breaker switch at the input terminal
  • Backup
    7 min. at 100% load, 18 min. at 50% load
  • Correction Time
    Online.
  • Output Operating Frequency
    50 or 60Hz +/- 0.2% (battery mode)
  • Configuration
    Tower
  • Alarm Type
    Audible
  • Interface
    RS-232 Smart UPS (optional SNMP interface)

Supplemental Options

  • External SNMP adaptor
  • Technology for parallel capacity or redundancy
  • External battery bank for extended backup time
  • Industronic Power Conditioner/Voltage Regulator to protect the UPS and extend battery life

UPS-IND Illustration

  1. RS-232 Port
  2. Input Circuit Breaker
  3. Maintenance Bypass
  1. Input and output connection block
  2. Bypass power supply switch
  3. Battery switch
ups12004

Specification Table

INPUT

MODEL UPS-IND 1238(6KVA) UPS-IND 1246(10KVA)
Voltage (Vca) 220,230,240V / (165-275Vca)
Frequency (Hz) 50/ 60±5% (50/60Hz)
Power Factor >0.99 at full load

 

OUTPUT

MODEL UPS-IND 1238(6KVA) UPS-IND 1246(10KVA)
Capacity (VA/W) 6000/4200 10000/7000
Power Factor 0.80
Voltage (VAC) 220/230/240 ± 1% ó 110/120 ± 1%
Frequency (Hz) 50 / 60 ±0.5% (battery mode)
Waveform Pure sine wave THD <3% (linear load)
Transfer Time 0
Overload 125% load for 60 seconds, 150% load for 1 second

 

BATTERIES

MODEL UPS-IND 1238(6KVA) UPS-IND 1246(10KVA)
Voltage (VDC) 192
Battery Type 16x7Ah12V (in the same cabinet) 32x7Ah12V
Backup Time 7 minutes (at full load) 8 minutes (at full load)
Maximum Load Current (A) 1/4.5 3/4.5
Communications Interface RS-232, dry contacts (optional USB and SNMP adaptors)

 

OTHERS

MODEL UPS-IND 1238(6KVA) UPS-IND 1246(10KVA)
Screen LCD display showing: Input Voltage, Output Voltage, Load Capacity, Battery Voltage and Operating Status
Alarm Overload, Irregular Alternating Current Input and Low Battery
Protection Low Battery, Overheating, Short Circuit, Output Voltage Surge and Low Output Voltage
Noise (dB) ² 55
Operating Temperature 0-40º Centigrade (32-104º Fahrenheit)
Relative Humidity 0-95% (without condensation)
Dimensions (Width x Depth x Height)(mm) 230x635x690 300x740x700
Weight (Kg) 91 85

Due to continuous improvements in our products, specifications are subject to change and change without notice.

Downloads

UPS-IND 1200

Model Data Sheet Manual
UPS-IND 1200 Download Download

Power Calculator

Instantly calculate the capacity of the equipment that you require filling the following fields:

CURRENT:

PHASES:

KVAS:

Calculate

request Pricing

Name*:

E-mail*:

Phone*:

Company:

Country*:

Comments*:

Information about your inquiry:

*Required

logos

Top
INDUSTRONIC INDUSTRONIC
×