Grupo Industronic
UPS-IND 1100
movil06_12ago15
Single phase UPS with surge protection for small applications such as home, office or clinic.
UPS-IND 1100
1100_slide
Single phase UPS with surge protection for small applications such as home, office or clinic.

VIDEO

Features

CARACT_UPS_1100

Features

  • Online double conversion, enabling continuous operation of electrical equipment
  • Wide range of input voltage
  • Electronic/automatic bypass with zero transfer time
  • Cold-start capability, battery start-up
  • Software for the UPS-IND 1100 monitoring system

Technical Specifications

  • Voltage Range
    120V (+ 23% – 33%) 80-148VAC
  • Output Voltage Options
    110, 115, 120 or 125VAC (+/- 1%)
  • Power Factor
    0.8 (at full load)
  • Efficiency
    99% average
  • Output Distortion
    Less than 3% THD (linear load)
  • Overload Protection
    In 2 and 3kVA single-phase equipment: Circuit breaker switch at the input terminal (Fuse in 1kVA single-phase equipment)
  • Backup
    7 min. at 100% load, 18 min. at 50% load.
  • Battery
    12V/7.2Ah
  • Correction Time
    Online
  • Operating Temperature
    0 to 40 degrees C (32-104º F)
  • Interface
    RS-232 Smart UPS (Optional SNMP interface)
  • Configuration
    Tower
  • Alarm Type
    Audible
  • Output Operating Frequency
    50 or 60Hz +/- 0.2% (battery mode)

Supplemental Options

  • External SNMP adaptor
  • External battery cabinet for extended backup
  • Industronic Power Conditioner/Voltage Regulator to protect the UPS and extend battery life

UPS Architecture

1100_diagrama

Specification Table

INPUT

MODEL UPS-IND 1110 UPS-IND 1118 UPS-IND 1122
Capacity (W)/(VA) 800/1000 1600/2000 2400/3000
Overloading protection Fusible Termomagnetic switch
Voltage (Vca) 120 (+23% -33%) / 80 – 148
Phases 1 phase (2 wires more ground connection)
Frequency (Hz) 60 ± .095% full load
Input power factor 0.80 empty, > 0.95 at full load

 

OUTPUT

MODEL UPS-IND 1110 UPS-IND 1118 UPS-IND 1122
Output power factor .8
Voltage (Vca) 120 ± 1% (optional 110/115/125 ± 1%)
Frequency (Hz) 60 ± 0.2% (optional 50 ± 0.2%)
Waveform Pure sine wave THD ≤ 3% (lineal load)
Transfer Time (ms) 0.0 online
Overload 105% ~ 130% load for 60 seconds: 135% ~ 150% for 30 seconds: ≥ 150% por 300 ms

 

BATTERIES

MODEL UPS-IND 1110 UPS-IND 1118 UPS-IND 1122
Voltage (Vcd) 36 72 96
Battery type Sealed and free maintenance lead acid
Maximum Load Current (A) (min) 7 (at full load)* 8 (at full load)* 5 (at full load)*
Current of maximum load (A) 1
Battery pack Intern

 

PHYSICAL AND MECHANICAL

MODEL UPS-IND 1110 UPS-IND 1118 UPS-IND 1122
Acoustical noise (dB) <45, a 3 feet
MTBF (hrs) 130,000
TOperating temperature (°C) 0 ~ 40
Relative humidity 0 ~ 95% without condensation
Maximum operating elevation (FASL) 3,000
Cabinet Steel with electrostatic epoxy paint
Dimensions (width × depth × height in cm)**** 22 x 16 x 47 35 x 20 x 50
UPS weight (kg)** 14* / 7** 26* / 14** 30* /14**

 

TECNOLOGY

MODEL UPS-IND 1110 UPS-IND 1118 UPS-IND 1122
Conversion type Online double conversion
Rectifier Solid state rectifier bridge with PFC
Inverter switch components IGBT technology switched at a rate of 9000 Hz
Inverter configuration H-Bridge
Inverter type Pulse-width modulation (PWM)
Battery status Information online or via real-time download with accuracy of ± 3 %
Heat dissipation (kBTU/h) 5.59 9.63 14.45
Certifications UL, 1778, CE-IEC 62040 – 1, ISO 9001:2008, NOM
Communications interface USB and RS-232 communication port Compatible with power and SNMP software
Screen (monochromatic LCD) Backlit: input and output voltage, load capacity, battery voltage, LED operating mode indicators
Alarms Irregular main input, low battery voltage and UPS malfunction

Due to continuous improvements in our products, specifications are subject to change and change without notice.

Downloads

UPS-IND 1100

Model Data Sheet Manual
UPS-IND 1100 Download Download

Power Calculator

Instantly calculate the capacity of the equipment that you require filling the following fields:

CURRENT:

PHASES:

KVAS:

Calculate

Request Pricing

Name*:

E-mail*:

Phone*:

Company:

Country*:

Comments*:

Information about your inquiry:

*Required

logos

Top
INDUSTRONIC INDUSTRONIC
×